RC Phase Shift Oscillator using Op-Amp

Here in this project, we are going to make an RC Phase Shift Oscillator utilizing Op-Amp. An electronic oscillator circuit that gives sine wave yield is the Phase Shift Oscillator. It can either be composed by utilizing a semiconductor or utilizing a reversing amplifier, an operational amplifier. 

For the most part, these phase shift oscillators are utilized as sound oscillators. In the RC phase shift oscillator, a 180-degree phase shift is produced by the RC network, and the Op-amp creates another 180 degrees, so the subsequent wave is changed by 360 degrees. 

Aside from producing the sine wave yield, they are likewise used to give critical control over the phase-shifting cycle.

Hardware Components

The following components are required to make RC Phase Shift Oscillator Circuit

LM741 Pinout

For a detailed description of pinout, dimension features, and specifications download the datasheet of LM741

RC Phase Shift Oscillator Circuit

Circuit Operation

The oscillator of the RC phase shift gives an exact sine waveform. The first oscilloscope probe generates an input wave, the second Oscilloscope probe is supplied by the 90 ° Phase Shift Sine wave, the third is a 180-degree Phase Shift Sine, and the fourth is a 360 ° Phase Shift Output Wave. Here, a 180 ° phase shift is offered by the feedback network. Each of the RC networks has 60 degrees. And by the op-amp in the inverting configuration, the remainder 180 ° phase shift is produced. 

Using the following formulation to measure the frequency of oscillation: 

F = 1 / 2πRC√2N

Applications and Uses

The applications of the RC Phase Shift Oscillator are listed below:

1. In audio oscillators
2. Voice Synthesis
3. Sine Wave Inverter
4. Musical Instruments
5. GPS units