In this project
The LM833 is a dual general-purpose operational amplifier designed with particular emphasis on performance in audio systems. This dual amplifier IC utilizes new circuit and processing techniques to deliver low noise, high speed, and wide bandwidth without increasing external components or decreasing stability. The LM833 is internally compensated for all closed-loop gains and is therefore optimized for all preamp and high-level stages in PCM and HiFi systems. The LM833 is pin-for-pin compatible with industry-standard dual operational amplifiers.
LM833 Pinout
LM833 Pin Configuration
| Pin No | Pin Name | Description |
|---|---|---|
| 1 | OUTA | Output Pin A |
| 2 | INV-IN A | Inverting Input Pin A |
| 3 | NON-INV-IN A | Non-Inverting Input Pin A |
| 4 | -VEE | Negative Emitter supply |
| 5 | NON-INV-IN B | Non-Inverting Input Pin B |
| 6 | INV-IN B | Inverting Input Pin B |
| 7 | OUTB | Output Pin B |
| 8 | VCC | Supply Voltage |
LM833 Key Features
- Wide dynamic range: >140dB
- Low input noise
- voltage: 4.5nV/√Hz
- High slew rate: 7 V/µs (typ); 5V/µs (min)
- High gain bandwidth: 15MHz (typ); 10MHz (min)
- Wide power bandwidth: 120KHz
- Low distortion: 0.002%
- Low offset voltage: 0.3mV
- Large phase margin: 60˚
- Available in 8 pin MSOP package
Application
- Dual Operational Amplifiers.
You can download this datasheet for LM833 Dual Audio Op-Amp - Datasheet from the link given below:
Discussion
Be the first to comment