Skip to content

DC to DC Converter (1.5 to 5v/12v)

2 min read 9,340 views
DC to DC Converter

A DC Chopper commonly known as a DC-to-DC converter is an electronic device. It converts unidirectional direct current (DC) from one specified voltage level to another desired voltage level. It is an electric power converter. ‎Moreover, the Power levels range from exceptionally low amp batteries to extremely high-voltage power transmission.‎

A DC chopper utilizes in the majority of the appliances that work on constant voltage. Right now in this article, we will demonstrate a 1.5V DC-to-DC converter or DC chopper by utilizing LT1073 IC.‎
The LT1073 is a micropower DC-to-DC converter. The IC requires just three external electronic ‎components to convey a fixed output voltage of 5V or 12V. The low voltage supply of 1V permits ‎the utilization of the LT1073 in applications where the main and primary power source is a single cell.‎

Buy Now

Hardware Components

The following components are required to make DC to DC Converter Circuit

S.noComponentsValueQty
1.ICLT10731
2.Meter inductance82µH1
3.DiodeSB31001
4.Resistor820k, 100k, 47k, 40.2k1
5.Capacitor100µF 20V1
6.Battery1.5V1

LT1073 Pinout

For a detailed description of pinout, dimension features, and specifications download the datasheet of LT1073

DC to DC Converter Circuit

DC to DC Converter Circuit_Diagram-Schematic

Working Explanation

The circuit operation is quite simple. This versatile IC LT1073 is utilized to make a DC-to-DC converter with a low ‎operating voltage of just 95μA 1V without load. On the off chance that you don't have a meter ‎inductance, the inductive piece of the drive is more entangled to make. However, we will ‎see some potential solutions. The capacitor likewise suggested by the manufacturer for this circuit ‎is somewhat difficult to get. I have utilized a 'tantalum recuperated' from another power source. And the ‎ripple voltage at the yield is very low. To wrap things up, the diode must be ‎fast, not worth it as the 1N4002 rectifiers. Here, the 1N5818 is prescribed Schottky type, ‎characterized by high response time and low inner resistance, which is perfect for this ‎type of converter.‎

Applications and Uses

The basic purpose of the DC-to-DC converter is to change the DC voltage level:

  • Lower
  • Buck
  • Higher
  • boost
  • It can also be used for insulation purposes.

Share this project

Discussion

Be the first to comment

More projects you might like

More in DC to DC Converter Circuits