In this project
The LM7906 is a 3-terminal regulator is available with a fixed output voltage of b6V. This device needs only one external component a compensation capacitor at the output. This regulator employs internal current limiting safe area protection and thermal shutdown for protection against virtually all overload conditions.
The low ground pin current of the LM7906 allows the output voltage to be easily boosted above the preset value with a resistor divider. The low quiescent current drain of these devices with a specified maximum change with line and load ensures good regulation in the voltage boosted mode.
7906 Pinout
7906 Pin Configuration
| Pin No | Pin Name |
|---|---|
| 1 | Ground |
| 2 | Input |
| 3 | Output |
7906 Key Features
- Thermal, short circuit, and safe area protection
- High ripple rejection
- 1.5A output current
- 4% tolerance on the preset output voltage
Application
- Adjustable Power Supplies
- System Power Supplies
- Precision Voltage/Current Regulators
- On-Card Regulators
You can download this datasheet for 7906 -6V 1A Negative Regulator - Datasheet from the link given below:
Discussion
Be the first to comment